Strukture and Mossbauer spectroscopy studies of multiferroic mechanically activated aurivillius compounds

X-ray di raction and 57Fe Mössbauer spectroscopy were applied as complementary methods to investigate the structure and hyper ne interactions of the Aurivillius compounds prepared by mechanical activation and subsequent heat treatment. Preliminary milling of precursors enhanced the di usion process and pure Aurivillius compounds were obtained at lower temperature as compared with conventional solid-state sintering technology (lower at least by 50 K). All the investigated Aurivillius compounds are paramagnetic materials at room temperature

Adaptive latitudinal variation in Common Blackbird Turdus merula nest characteristics

Nest construction is taxonomically widespread, yet our understanding of adaptive intraspecific variation in nest design remains poor. Nest characteristics are expected to vary adaptively in response to predictable variation in spring temperatures over large spatial scales, yet such variation in nest design remains largely overlooked, particularly amongst open-cup-nesting birds. Here, we systematically examined the effects of latitudinal variation in spring temperatures and precipitation on the morphology, volume, composition, and insulatory properties of open-cup-nesting Common Blackbirds’ Turdus merula nests to test the hypothesis that birds living in cooler environments at more northerly latitudes would build better insulated nests than conspecifics living in warmer environments at more southerly latitudes. As spring temperatures increased with decreasing latitude, the external diameter of nests decreased. However, as nest wall thickness also decreased, there was no variation in the diameter of the internal nest cups. Only the mass of dry grasses within nests decreased with warmer temperatures at lower latitudes. The insulatory properties of nests declined with warmer temperatures at lower latitudes and nests containing greater amounts of dry grasses had higher insulatory properties. The insulatory properties of nests decreased with warmer temperatures at lower latitudes, via changes in morphology (wall thickness) and composition (dry grasses). Meanwhile, spring precipitation did not vary with latitude, and none of the nest characteristics varied with spring precipitation. This suggests that Common Blackbirds nesting at higher latitudes were building nests with thicker walls in order to counteract the cooler temperatures. We have provided evidence that the nest construction behavior of open-cup-nesting birds systematically varies in response to large-scale spatial variation in spring temperatures

Morphology and biomechanics of the nests of the Common Blackbird Turdus merula

Capsule Common blackbirds select different materials, with varying biomechanical properties, to construct different parts of their nest. Aims This study tested the hypothesis that outer components of a nest have a more structural role and so are stronger than materials used to line the cup. Methods Blackbird nests were measured prior to being dismantled to isolate structural components which were tested for mechanical strength and rigidity. Results Outer nest wall materials were significantly thicker, stronger and more rigid than materials in the inner structural wall or the cup lining. In the vertical plane materials used in the structural wall did not differ. By contrast, lining materials from the bottom of the nest cup were significantly thicker, stronger and more rigid than materials from the top of the cup. Conclusion Blackbirds use different materials in nest construction roles suited to their properties and so may be able to recognise the structural properties of these materials. Materials on the outside of the nest may have a key structural role during construction

Structure and magnetic properties of Bi5Ti3FeO15 ceramics prepared by sintering, mechanical activation and EDAMM process. A comparative study

Three different methods were used to obtain Bi5Ti3FeO15 ceramics, i.e. solid-state sintering, mechanical activation (MA) with subsequent thermal treatment, and electrical discharge assisted mechanical milling (EDAMM). The structure and magnetic properties of produced Bi5Ti3FeO15 samples were characterized using X-ray diffraction and Mössbauer spectroscopy. The purest Bi5Ti3FeO15 ceramics was obtained by standard solid-state sintering method. Mechanical milling methods are attractive because the Bi5Ti3FeO15 compound may be formed at lower temperature or without subsequent thermal treatment. In the case of EDAMM process also the time of processing is significantly shorter in comparison with solid-state sintering method. As revealed by Mössbauer spectroscopy, at room temperature the Bi5Ti3FeO15 ceramics produced by various methods is in paramagnetic state

Multi-modelling predictions show high uncertainty of required carbon input changes to reach a 4‰ target

Soils store vast amounts of carbon (C) on land, and increasing soil organic carbon (SOC) stocks in already managed soils such as croplands may be one way to remove C from the atmosphere, thereby limiting subsequent warming. The main objective of this study was to estimate the amount of additional C input needed to annually increase SOC stocks by 4%(0) at 16 long-term agricultural experiments in Europe, including exogenous organic matter (EOM) additions. We used an ensemble of six SOC models and ran them under two configurations: (1) with default parametrization and (2) with parameters calibrated site-by-site to fit the evolution of SOC stocks in the control treatments (without EOM). We compared model simulations and analysed the factors generating variability across models. The calibrated ensemble was able to reproduce the SOC stock evolution in the unfertilised control treatments. We found that, on average, the experimental sites needed an additional 1.5 +/- 1.2 Mg C ha(-)(1) year(-1) to increase SOC stocks by 4%(0) per year over 30 years, compared to the C input in the control treatments (multi-model median +/- median standard deviation across sites). That is, a 119% increase compared to the control. While mean annual temperature, initial SOC stocks and initial C input had a significant effect on the variability of the predicted C input in the default configuration (i.e., the relative standard deviation of the predicted C input from the mean), only water-related variables (i.e., mean annual precipitation and potential evapotranspiration) explained the divergence between models when calibrated. Our work highlights the challenge of increasing SOC stocks in agriculture and accentuates the need to increasingly lean on multi-model ensembles when predicting SOC stock trends and related processes. To increase the reliability of SOC models under future climate change, we suggest model developers to better constrain the effect of water-related variables on SOC decomposition

Toxicity bioassay of waste cooking oil-based biodiesel on marine microalgae

The world biodiesel production is increasing at a rapid rate. Despite its perceived safety for the environment, more detailed toxicity studies are mandatory, especially in the field of aquatic toxicology. While considerable attention has been paid to biodiesel combustion emissions, the toxicity of biodiesel in the aquatic environment has been poorly understood. In our study, we used an algae culture growth-inhibition test (OECD 201) for the comparison of the toxicity of B100 (pure biodiesel), produced by methanol transesterification of waste cooking oil (yellow grease), B0 (petroleum diesel fuel) and B20 (diesel-biodiesel blended of 20% biodiesel and 80% petroleum diesel fuel by volume). Two marine diatoms Attheya ussuriensis and Chaetoceros muelleri, the red algae Porphyridium purpureum and Raphidophyte Heterosigma akashiwo were employed as the aquatic test organisms. A sample of biodiesel from waste cooking oil without dilution with petroleum diesel (B100) showed the highest level of toxicity for the microalgae A. ussuriensis, C. muelleri and H. akashiwo, compared to hexane, methanol, petroleum diesel (B0) and diluted sample (B20). The acute EC50 in the growth-inhibition test (96 h exposure) of B100 for the four species was in the range of 3.75–23.95 g/L whereas the chronic toxicity EC50 (7d exposure) was in the range of 0.42–16.09 g/L

Re-emergence of tularemia in Germany: Presence of <it>Francisella tularensis </it>in different rodent species in endemic areas

<p>Abstract</p> <p>Background</p> <p>Tularemia re-emerged in Germany starting in 2004 (with 39 human cases from 2004 to 2007) after over 40 years of only sporadic human infections. The reasons for this rise in case numbers are unknown as is the possible reservoir of the etiologic agent <it>Francisella (F.) tularensis</it>. No systematic study on the reservoir situation of <it>F. tularensis </it>has been published for Germany so far.</p> <p>Methods</p> <p>We investigated three areas six to ten months after the initial tularemia outbreaks for the presence of <it>F. tularensis </it>among small mammals, ticks/fleas and water. The investigations consisted of animal live-trapping, serologic testing, screening by real-time-PCR and cultivation.</p> <p>Results</p> <p>A total of 386 small mammals were trapped. <it>F. tularensis </it>was detected in five different rodent species with carrier rates of 2.04, 6.94 and 10.87% per trapping area. None of the ticks or fleas (n = 432) tested positive for <it>F. tularensis</it>. We were able to demonstrate <it>F. tularensis-</it>specific DNA in one of 28 water samples taken in one of the outbreak areas.</p> <p>Conclusion</p> <p>The findings of our study stress the need for long-term surveillance of natural foci in order to get a better understanding of the reasons for the temporal and spatial patterns of tularemia in Germany.</p

Investigating an Airborne Tularemia Outbreak, Germany

Infectious aerosols can contribute to the transmission of tularemia during processing of dead hares

Efficacy of manipulation for non-specific neck pain of recent onset: design of a randomised controlled trial

BACKGROUND: Manipulation is a common treatment for non-specific neck pain. Neck manipulation, unlike gentler forms of manual therapy such as mobilisation, is associated with a small risk of serious neurovascular injury and can result in stroke or death. It is thought however, that neck manipulation provides better results than mobilisation where clinically indicated. There is long standing and vigorous debate both within and between the professions that use neck manipulation as well as the wider scientific community as to whether neck manipulation potentially does more harm than good. The primary aim of this study is to determine whether neck manipulation provides more rapid resolution of an episode of neck pain than mobilisation. METHODS/DESIGN: 182 participants with acute and sub-acute neck pain will be recruited from physiotherapy, chiropractic and osteopathy practices in Sydney, Australia. Participants will be randomly allocated to treatment with either manipulation or mobilisation. Randomisation will occur after the treating practitioner decides that manipulation is an appropriate treatment for the individual participant. Both groups will receive at least 4 treatments over 2 weeks. The primary outcome is number of days taken to recover from the episode of neck pain. Cox regression will be used to compare survival curves for time to recovery for the manipulation and mobilisation treatment groups. DISCUSSION: This paper presents the rationale and design of a randomised controlled trial to compare the effectiveness of neck manipulation and neck mobilisation for acute and subacute neck pain